| MODEL |
SKIT-60D |
SKIT-60F |
| |
| OUTPUT |
DC VOLTAGE |
5V |
12V |
24V |
5V |
15V |
24V |
| RATED CURRENT |
3A |
0.8A |
1.4A |
3A |
0.8A |
1.3A |
| CURRENT RANGE |
0.5 ~ 3A |
0.1 ~ 1A |
0.2 ~ 2A |
0.5 ~ 3A |
0.1 ~ 1A |
0.2 ~ 2A |
| RATED POWER |
58.2W |
58.2W |
| OUTPUT POWER Note.4 (max.) |
70W(3sec.) |
| RIPPLE & NOISE (max.) Note.2 |
80mVp-p |
120mVp-p |
240mVp-p |
80mVp-p |
150mVp-p |
240mVp-p |
| VOLTAGE ADJ. RANGE |
CH1 : +10,-5% |
| VOLTAGE TOLERANCE Note.3 |
¡À1.0% |
¡À3.0% |
... |
¡À1.0% |
¡À3.0% |
... |
| LINE REGULATION |
¡À1.0% |
¡À0.5% |
... |
¡À1.0% |
¡À0.5% |
... |
| LOAD REGULATION |
¡À1.0% |
¡À0.5% |
... |
¡À1.0% |
¡À2.0% |
... |
| SETUP, RISE, HOLD TIME |
300ms, 20ms, 50ms/230VAC 800ms, 20ms, 15ms/115VAC at full load |
|
|
| INPUT |
VOLTAGE RANGE |
90 ~ 264VAC 127 ~ 370VDC |
| |
FREQUENCY RANGE |
47 ~ 63HZ |
| |
EFFICIENCY (Typ.) |
76% |
| |
AC CURRENT |
1.8A/115VAC 0.9A/230VAC |
| |
INRUSH CURRENT (max.) |
COLD START 25A/115VAC 50A/230VAC |
| |
LEAKAGE CURRENT |
<1mA / 240VAC |
| |
| PROTECTION |
OVERLOAD |
72 ~ 90W of rate load |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| OVER VOLTAGE |
5V: 5.75 ~ 6.75V |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| |
| ENVIRONMENT |
WORKING TEMP.,HUMIDITY |
-10 ~ +60¡æ (Refer to output load derating curve) |
| STORAGE TEMP., HUMIDITY |
-20 ~ +85¡æ , 10 ~ 95% RH |
| TEMP. COEFFICIENT |
0.03%/ (0 ~ 50) |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| |
| SAFETY & EMC
(Note 4) |
SAFETY STANDARDS |
UL1012, UL1950, TUV EN60950 Approved |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI CONDUCTION & RADIATION |
Compliance to EN55022 (CISPR22) Class B |
| HARMONIC CURRENT |
Compliance to EN61000-3-2,-3 |
| EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A |
| |
| OTHERS |
MTBF |
314.3K hrs min. MIL-HDBK-217F (25¡æ) |
| DIMENSION |
159*97*38mm (L*W*H) |
| PACKING |
0.55Kgs/pcs, 24pcs/13.2Kgs/0.75CUFT |
| |
| NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Peak load for 3sec. Repeatable every minute. |
