SKPSP-1500 Page No. [1] [2] Current PageNo. 1

Features: AC input active surge current limiting. Built-in active PFC function, PF>0.95. Protections:Short circuit/Over load/Over voltage/Over temperature. Built-in constant current limiting circuit. Built-in remote ON-OFF control. Built-in remote sense function. 3 years warranty.

SPECIFICATION MODEL SKPSP-1500-5 SKPSP-1500-12 SKPSP-1500-13.5 SKPSP-1500-15 SKPSP-1500-24 SKPSP-1500-27 SKPSP-1500-48 OUTPUT DC VOLTAGE 5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 217.5A 112.5A 100.5A 90A 56.4A 50.4A 28.5A CURRENT RANGE 0 ~ 217.5A 0 ~ 112.5A 0 ~ 100.5A 0 ~ 90A 0 ~ 56.4A 0 ~ 50.4A 0 ~ 28.5A RATED POWER 1087.5W 1350W 1356.75W 1350W 1353.6W 1360.8W 1368W RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10 ~ 13.2V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 24 ~ 30V 41 ~ 56V VOLTAGE TOLERANCE Note.3 ±6% ±3% ±2% ±2% ±1% ±1% ±1% LINE REGULATION ±0.5% ±0.3% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±2% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE, HOLD TIME 1.5s, 50ms, 15ms/230VAC at full load INPUT VOLTAGE RANGE 176 ~ 264VAC 248 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF>0.95/230VAC PF>0.95/115VAC at full load EFFICIENCY (Typ.) 77% 84% 84% 84% 86% 86% 86% AC CURRENT 10.5A/230VAC INRUSH CURRENT (max.) 100A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC PROTECTION OVERLOAD 115~140% of rate load Protection type : Constant current limiting, recovers automatically after fault condition is removed. OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shunt down o/p voltage, re-power on to recover. OVER TEMPERATURE TSW1: 95℃(Detect on the heatsink of PFC MOSFET) TSW2: 90 (Detect the winding of output choke) Protection type : Shun down o/p voltage, recovers automatically after temperature goes down FUNCTION FAN CONTROL O.T.P. RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <20mA ENVIRONMENT WORKING TEMP.,HUMIDITY -10 ~ +65℃ (Refer to output load derating curve), 20 ~ 90% RH STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY & EMC SAFETY STANDARDS UL1950, TUV EN60950 Approved EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3, Class A WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC OTHERS MTBF 43.4K hrs min. MIL-HDBK-217F (25℃) DIMENSION 278*129*190.5mm (L*W*H) PACKING 6.9Kgs/pcs, 2pcs/13.8Kgs/1.14CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Peak output power: can be used continuously for 30 seconds (max.).