SCN-800 Page No. [1] [2] [3] Current PageNo. 1
Features:
AC input range selected by switch.
Protections: Short circuit/ Over voltage/Over load/ Over temp.
High reliability/ Low ripple nois.
Built-in remote sense functio.
Built-in remote ON-OFF contro.
With parallel functio.
Can adjust from 20~100% output voltage by external control 1-5.
Forced air cooling by built-in DC fa.
Case coating with pain.
2 years warranty.
SPECIFICATION
MODEL SKSCN-800-12 SKSCN-800-15 SKSCN-800-24 SKSCN-800-48
OUTPUT DC VOLTAGE 12V 15V 24V 48V
RATED CURRENT 66A 54A 33A 16.6A
CURRENT RANGE 0 ~ 66A 0 ~ 54A 0 ~ 33A 0 ~ 16.6A
RATED POWER 800W 800W 800W 800W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 240mVp-p 480mVp-p
VOLTAGE ADJ. RANGE ¡À5.0% typical adjustment by potentiometer 20~100% adjustment by 1~5VDC external.
VOLTAGE TOLERANCE Note.3 ¡À1.0% ¡À1.0% ¡À1.0% ¡À1.0%
LINE REGULATION ¡À0.5% ¡À0.5% ¡À0.5% ¡À0.5%
LOAD REGULATION ¡À0.5% ¡À0.5% ¡À0.5% ¡À0.5%
SETUP, RISE, HOLD TIME 800ms, 50ms, 16ms at full load
INPUT VOLTAGE RANGE 90 ~ 130VAC / 180~260VAC, 130~180VDC / 260~370VDC selected by switch
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 77% 80% 81% 82%
AC CURRENT 11A / 115VAC 7.0A / 230VAC
INRUSH CURRENT (max.) 60A / 230VAC
LEAKAGE CURRENT 3.5mA / 240VAC
PROTECTION OVERLOAD 101~115% 110~135% rated output power
Protection type : Current limiting, delay shut down o/p voltage, re-power on to recover.
OVER VOLTAGE 110~135% follow to output set up point
Protection type : Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE >100¡æ / measure by heat sink, near transformer
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT WORKING TEMP.,HUMIDITY -10 ~ +65¡æ (Refer to output load derating curve), 20 ~ 90% RH
STORAGE TEMP., HUMIDITY -20 ~ +85¡æ, 10 ~ 95% RH
TEMP. COEFFICIENT ¡À0.04%/¡æ (0 ~ 50¡æ)
VIBRATION 10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC SAFETY STANDARDS Design refer to UL1950, CSA22.2, IEC60950
EMI CONDUCTION & RADIATION Design refer to FCC part 15 class A
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OTHERS MTBF 120khrs min. MIL-HDBK-217F (25¡æ)
DIMENSION 291*132*68mm (L*W*H)
PACKING 2.3kg; 8pcs/ 24kg/ CARTON
SPECIAL FUNCTION DC voltage adj., Remote sensing, remote control, parallel operation (refer to terminal instruction manual)
NOTE 1.All parameters are specified at 230VAC input, rated load, 2. 70% RH. Ambient.
2.Tolerence: includes set up tolerance, line regulation, load regulation.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meet.
EMC directives.