Features: ISO-9001 CERTIFIED MANUFACTURER LOW COST, HIGH RELIABILITY COMPACT SIZE, LIGHT WEIGHT COOLING FAN ON/OFF AUTOMATICALLY BUILT IN REMOTE CONTRAL 105℃ OUTPUT CAPACITOR INTERNATIONAL AC INPUT RANGE BUILT IN EMI FILTER, LOW RIPPLE NOISE HIGH EFFICIENCY, LOW WORKING TEMPERATURE BUILT IN PFC CIRCUIT SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE,OVER TEMP.PROTECTED

SPECIFICATION MODEL SKSP-500-12 SKSP-500-13.5 SKSP-500-15 SKSP-500-24 SKSP-500-27 SKSP-500-48 OUTPUT DC VOLTAGE 12V 13.5V 15V 24V 27V 48V RATED CURRENT 40A 36A 32A 20A 18A 10A CURRENT RANGE 0 ~ 40A 0 ~ 36A 0 ~ 32A 0 ~ 20A 0 ~ 18A 0 ~ 10A RATED POWER 480W 486W 480W 480W 486W 480W RIPPLE & NOISE (max.) Note.2 240mVp-p 240mVp-p 240mVp-p 240mVp-p 200mVp-p 300mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.2V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 32V 41 ~ 56V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE, HOLD TIME 1.5s, 50ms, 20ms INPUT VOLTAGE RANGE 88 ~ 264VAC 47 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR 0.95/100 ~ 240VAC EFFICIENCY (Typ.) 84% 84% 83% 85.5% 86.5% 87% AC CURRENT 7A/115V 3.5A/230V INRUSH CURRENT (max.) 18A/115V 36A/230V LEAKAGE CURRENT <3.5mA / 240VAC PROTECTION OVERLOAD 105 ~ 135% of rate load Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover. ENVIRONMENT WORKING TEMP. -10 ~ +50℃ (Refer to output load derating curve), 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY & EMC (Note 4) SAFETY STANDARDS UL1950, TUV EN60950 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC OTHERS DIMENSION 170*120*93mm NOTE 1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25℃ 70% RH. AMBIENT. 2.TOLERANCE : INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION. 3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR. 4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. 5.LOAD REGULATION IS MEASURED FROM 0% TO 100% RATED LOAD. 6.C3,4,41,63 MUST BE REMOVED. 7.REFER TO OUTPUT DERATING CURVE VS INPUT VOLTAGE.